WrightChoice Energy Storage Device

Energy Storage Devices are on sale now from the inventor’s website. Use this link to buy one. https://www.wrightpumps.co.uk/shop/
This device is the part of a range of solutions to support the inventors vision of widespread low cost heat stores in homes and factories throughout the UK. Use this link to read about this vision.
WrightChoiceUK.Com
For fitting instructions use this link.
Fitting Instructions

The WrightChoice Energy storage device fits to the outside of an existing hot water cylinder, so that an existing hot water cylinder that stores 2 Kw/Hr of energy can store 10 Kw/Hr of energy (Thats 5 times more energy stored). The device fully complements and increases the storage you can achieve with an iboost or an Eddi or you can store night time and off peak energy with a simple timer.

An existing hot water cylinder will store 2 Kw/Hr of energy before fitting the device.

A Hot Water Cylinder without a a Energy Storage Device will only heat 70 litres of water and store 2 Kw/Hr of energy.

With a WrightChoice Energy Storage Device the entire hot water cylinder is heated. — With a WrightChoice Energy Storage Device the entire hot water cylinder is heated typically storing 10 KW/Hr of energy.

Our temperature controller interfaces with any immersion power diversion system by monitoring the temperature of a hot water cylinder.

Picture of a Energy Storage Device fitted to a hot water cylinder, Integrated with an iboost, and fully insulated after fitting.

Heat Loss after insulation with layers of insulation is minimal.

Shower Power Booster

No Results Found