WRAS Approved Approved components
UK Designed Designed in Britain
3 Year Warranty* Product protection

SP21S: Shower Power Booster Pack for Gravity Hot and Mains Pressure Cold Systems

£176.00
Product Overview

The Shower Power Booster SP21S gives the best performance for gravity hot and mains pressure cold systems.  You can get the equivalent of mains pressure hot to balance mains pressure cold with a SP21S.

In stockReady for dispatch
Free UK deliveryNext working day available
Secure checkoutPayPal and card payments
SKU: SP21SG

Description

If your cold water comes straight off the mains whilst your hot comes down from a tank in the loft, the two sides of your shower were never starting from the same place. The cold arrives with real force behind it, and the hot only has the gentle fall from the tank to carry it along, so at the mixer the cold often wins. That’s why turning the dial further towards hot tends to leave you with less water rather than more, and why the temperature wanders whenever somebody runs a tap in another room.

The SP21S is two Shower Power Boosters fitted one behind the other on the same hot pipe, working together to give your hot water twice the push that a single pump can manage.

You can get the equivalent of mains pressure hot to balance mains pressure cold with a SP21S.

A Shower Power Booster is available as a single pump or in bundles of two pumps.

A ShowerPowerBooster will boost any and all systems but it is particularly useful in boosting gravity and mixed gravity systems where existing pressures are low. It will not impeded flow should there be a power cut.

The SP2B is a fully automatic pump and a single pump will be effective for most applications but we recommend that you buy a SP21S double boost or a SP22S for boosting hot and cold for some applications (click on links below).

Gravity Hot & Cold Systems

Gravity Hot & Mains Cold Systems

Negative Head Systems

Boosting Kitchen Taps

Single, Double, & Triple Boosts

Fitting Pumps in Lofts

Boosting Showers & Taps in Hotels

Detailed drawings and instructions are in the booklet sent with the pumps but you can download  the online version of this guide from our website

ProductBrandShower Power Booster
ManufacturerFlowflex Components LTD
General3 Year Warranty (2 years without SPB Ultimate Care Pack)
30 Day Return Policy
WRAS Approval - 2002802
FeaturesPump TypeCentrifugal with Brushless Motor
Inlet Filter✔
Dry run protection✔
Waterproof✔
MaterialsBodyBrass - BS6282-5
PumpPlastic
PhysicalLength150mm
Width45mm
Height125mm
Weight625g
Pump Connection22mm or 15mm Compression
Maximum Head5.2m to 6m
PerformanceTypical Output5 L/Min @ 3.2m
Max Sustained Pressure4 Bars
Max Sustained Temperature65 - 85°C
Min Flow Rate1.5 L/Min
Max Flow Rate9 L/Min
Transformer12 Volt (1.5 amp or 3.0 amp)
ElectricalInput100 - 240 Volts 50/60Hz
Output12 Volts DC
Power Consumption12.6 Watts @ 5 L/Min
Fuse Rating3 Amp
Power Cable3 Pin Plug with 1m AC Cable Male DC Plug with 1m DC Cable

Contained in box:

  • 1 x Shower Power Booster automatic water pump
  • 1 x Shower Power Booster manual water pump
  • 2 x Fitting attachments for 22mm or 15mm diameter pipe
  • 1 x power supply (3 amp)
  • 1 x 3-way power cable (to link pumps)
  • 1 x Installation guide & instructions